裂纹扩展测试的裂纹扩展片-测量裂纹长度

夸父追日

上海褒博机电科技有限公司

www.servotesting.com

info@servostering.com

132 9607 7830

裂纹长度测试是疲劳裂纹扩展研究的前提，而基于间接电流电位法测量裂纹长度的裂纹扩展片具有精度高、成本低、操作简单、抗干扰性强和自动记录与处理等优点。
附件为国内一篇关于裂纹扩展片的介绍。
链接为产品资料下载地址。上海褒博-裂纹扩展测量仪Fractomat_e.pdf

FRACTOMAT® MODEL  2010
Part no	Description
2010	FRACTOMAT® MODEL 2010 TWO-CHANNEL CRACK-LENGTH MEASURING  AND CONTROL SYSTEM FOR THR “KRAK-GAGE INDERECT  POTENTIAL DROP TEST METHOD.    Complete Test System Includes:      - Two Precision (0.01%) 4 ½ Digit PANEL DISPLAYS for Channels A and B.      - Microprocessor based control with memory for all switchable Functions,  Including Status indicators.      - Ten Calibrated SCALE RANGES for each channel for KRAK-GAGES®.      - Two Calibrated LIMIT DETECTORS with relay contact outputs.      - Two ZERO-CALIBRATION Circuits each with 4 adjustable Precision current  sources.      - Built-in Integral FRACTOMAT® CALIBRATOR.      - ANALOG VOLTAGE OUTPUTS on a pair of front panel tip Jacks for each channel.      - ANALOG AND LIMIT DETECTOR OUTPUTS on a rear panel Connector.      - POWER INPUT Module on the rear panel including ON/OFF Switch, AC power line  filter and Fuse Drawer. Power input   Is 110-2240 VAC. (no range selection necessary).      - INPUT CABLES, CH A & B, 2 each color coded, 10 ft. long.      - Instruction / Operating Manual in English.      - Universal brushed aluminum and  black vinyl enclosure for Benchtop or 19-in. rack mounting (17 in. W, 5 ¼ in.  H, 10 in. DP) Net Weight: 12 lbs. Gross Shipping Weight: 18 lbs.
file:///C:\Users\a\AppData\Local\Temp\msohtmlclip1\01\clip_image001.gif
FRACTOMAT® Quantity  Discount Schedule	Applies to multiple purchases of  FRACTOMAT®, Model 2010 on Single purchase order.
	2 Units
	3 Units
	4 – 6 Units
	7-10 Units
file:///C:\Users\a\AppData\Local\Temp\msohtmlclip1\01\clip_image001.gif
KRAK-GAGE®
Part no	Description
	KRAK-GAGE®, STANDARD GAGE, -100°F to 300°F with epoxy-phenolic fiberglass reinforced backing, 50  micron (.002 in.) thick, constantan alloy, 5 micron  thick, including separate epoxy glass solder terminals (4 each gages).
KG-A05	5 mm, packaged @ 6 gages/ea. per pkg
KG-A10	10 mm, packaged @ 6 gages/ea. per pkg
KG-A15	15 mm, packaged @ 6 gages/ea. per pkg
KG-B20	20 mm, packaged @ 6 gages/ea. per pkg
KG-B25	25 mm, packaged @ 6 gages/ea. per pkg
KG-B30	30 mm, packaged @ 6 gages/ea. per pkg
KG-C40	40 mm, packaged @ 4 gages/ea. per pkg
KH-C50	50 mm, packaged @ 4 gages/ea. per pkg
KG-D100	100 mm, packaged @ 2 gages/ea. per pkg
KG-E200	200 mm, packaged @ 1 gage ea. per pkg
	FOR BOLT HOLES,  SERIES –BH KRAK-GAGE®, SERIES – BH for bolt holes, constantan alloy 5 micron, epoxy phenolic backing,  fiberglass reinforced, 50 micron   nominal thickness, -100° F to +300°F. Including separate epoxy glass solder  terminals. Furnished with calibration curves. All packaged @ 4 gages ea. Per  pkg.
KG-BH3125-CE	For 0.3125 In. max dia., 12 mm crack length
KG-BH4375	For 0.4375 In. max. dia., 18 mm crack length
KG-BH5616-X08	For 0.5625 In. max dia., 8 mm crack length
KG-BH5616-x15	For 0.5625 In. max. dia., 15 mm crack length
KG-BH5625	For 0.5625 In. max. dia., 22 mm crack length
KGBH7500	For 0.7500 In. max. dia., 28 mm crack length
KG BH10000	For 1.0000 In. max dia., 38 mm crack length
Quantity Discount Schedule:	KRAK-GAGE® Same Type Gages  on single order:
	1-4 Pkgs. – Net
	5-9 Pkgs. – Less 10%
	10-24 Pkgs. – Less 16%
	25 up Pkgs. – Less 20%
file:///C:\Users\a\AppData\Local\Temp\msohtmlclip1\01\clip_image001.gif
ACCESSORIES  & BONDING JIGS
Part No.	Description
353-ND	EPOXY ADHESIVE, TTI 353-ND, Per Bulletin 8010-2r1, Kit of 4 each  pre-weighed mixing pouches of 4 grams net adhesive (16 grams).
TSC-BJ	TEFLON CURING SHEETS, for use with Bonding Jigs. 10 mils thick   (0.010”). Kit of 4 sheets each, 5” X 8”.
SRP-BJ	SILICONE RUBBER PRESSURE PADS, 1/8” thick with silicone Adhesive backing  on one side, 50 durometer, for use with Bonding Jigs. Kit of 2 pads each  4.25” wide X 9.00” long.
ICA-2005	INPUT CABLE ASSEMBLIES, with color-coded Lemo connectors and 10 ft.  shielded cable. Spare set of 2 each.
IME-2005	SPARE INSTRUCTION MANUAL, for FRACTOMAT® KRAK-GAGE ® 2 in. ring binder,  (English only)
	BONDING/CURING JIGS, per Technical Bulletin BJ-581, of Aluminum and  stainless steel, with Silicone Pressure Pads and Teflon Curing Sheets,  Maximum cure pressure 30-35 psi, Maximum bonding temperature 250 F.
BJ-A05	For maximum size – A05 KRAK-GAGE®, 10X10 mm or ½ “ X ½” Impact or Bend  specimens.
BJ-B25	For maximum size – B25 KRAK-GAGE® maximum specimen size 3.00” wide X  1.75” thick.
BJ-B30	For maximum size – B30 KRAK-GAGE®., maximum specimen size   5.25” wide X 2.00” thick.
BJ-C50	For maximum size – C50 KRAK-GAGE®, maximum specimen size   6.00” X 3.00” thick.
-CN	or specify - Option –CN for pad size for center-notched specimens for  maximum 2 ea. –B30 KRAK-GAGES®.