NVH工程师职位的一些搜索结果

happyman

今天在网上随便搜索了一下NVH工程师的招聘信息，结果是出乎预料的多。
国内的就不说了，在baidu上搜出好多页的职位、招聘信息。
国外的职位信息也很多，大约半年前我在网上搜索的时候还远没有现在这么多信息，看来我们这个行业的就业形式越来越好。下面随便列出一些信息，供大家参考。所有信息均来自互联网。

happyman

NVH Engineer
Position Description:

Lead the refinement development task for the specified engine program and develop testing & analysis workplans to support the program timing.
Oversee those testing & analysis tasks to support NVH development and interpret analysis & test results to provide expert recommendations to a design team.
Liaise and work with vehicle and installation teams to deliver total NVH system to program targets. Lead component & design teams in resolution of refinement issues.

Skills Required:
Must be proficient at acoutic and vibration measurements using LMS SCADAS and Head Acoustics SQ Lab equipment.
Proven team working capability and NVH experience/knowledge.
Able to demonstrate good written and verbal communication skills and able to demonstrate high motivation and ability to work on own initiative

Experience Required:
Proven ability to take acoutic and vibration measurments from vehicles and powertrains.
Team working capability and NVH experience..

Education Required:
Experience more important than qualifications

Vacancy Summary
Job Type：Contract/Temp
Location： Basildon, Braintree, Chelmsford, Colchester, Dagenham, Southend, on, Sea, Essex
Start Date： ASAP
Duration：Ongoing
Salary：£21.00 p hour
Ref No:18307-29901_816049
Date Advertised：30 Jun 2008
http://www.jobsite.co.uk/cgi-bin/vacdetails.pl?selection=928831722&src=search

点评：
这个职位要求不高，对经验的要求高于对学位的要求，要求使用过LMS的SCADAS和Head 的SQ Lab，待遇也不错。
经验很重要。

happyman

Location: QLD - QLD-metro
Emp Ref:  56/175854   

--------------------------------------------------------------------------------

  Step towards Management Multiple Locations throughout SE QLD Work 9 - 5 an have a Life! As an acoustic specialist there are few opportunities that allow you to grow individually toward your career. Our client extends an invitation to those who have completed their studies, gained a few years experience within the acoustics arena, and seek the opportunity to step up into a management role. With a client base that is second to none, and a reputation to boot, this opportunity is rare to say the least. It will appeal only to those who are career minded, and are not afraid to move outside the square to get there. If you are a qualified engineer with expertise within the civil acoustics area, and are interested in more than a job, our client is interested in speaking further with you. Contact Kate Beuth for a confidential discussion. P: (07) 5526 4291 E: kate.beuth@hays.com.au


This position is Permanent, Full-Time ( hours: TBA )

To apply, please see description above.

Enquiries from all suitable Job seekers welcome.
https://jobsearch.gov.au/SearchR ... tDir=0&SortField=0&

happyman

Location: QLD - QLD-metro
Emp Ref:  56/176485   

--------------------------------------------------------------------------------

  New
Specialist Opportunity First Class Remuneration Work for Market Leaders A unique opportunity exists to join one of the Gold Coasts specialist Acoustic consultancies. Your role will have a strong focus on development planning and design: Noise attenuation Acoustic treatment Road traffic noise assessments Building and mechanical plant. Whilst working on some of the most highly acclaimed urban development and planning schemes, the position presents a huge variety of projects and travel opportunities within Australia. Ideally you will have 2 plus years experience in an acoustic consulting role. Tertiary qualifications in Engineering, Planning, Science or Environmental will be required and excellent communication skills, written and spoken are essential. You will be rewarded with an attractive remuneration package based on experience and qualifications. Furthermore, relocation assistance is available for the right interstate/overseas candidate. If you are interested in this unique, specialist role, please contact Kate Beuth Ph: (07) 5526 4291 E: kate.beuth@hays.com.au


--------------------------------------------------------------------------------

  This position is Permanent, Full-Time ( hours: TBA )

To apply, please see description above.

Enquiries from all suitable Job seekers welcome.   

--------------------------------------------------------------------------------

  
Last modified 04/07/2008 - Job ID: 181186684
https://jobsearch.gov.au/SearchR ... tDir=0&SortField=0&

happyman

NVH Engineer - Contract Job ID 170562

Location: Cambridgeshire Status: Applicants Required (Now Interviewing)
Rate: £24.00 to £28.00 per hour Date Updated: 24 June 2008
Duration: 6 months Further information call: 01489 898213

Important: Engines, Test
Introduction:

Heavy duty Diesel Engine manufacturer based in Cambridgeshire seeks an NVH Engineer for a long term contract position.

Job Specification:

In this position you will contribute to the development of engine and machine products, often involving root cause analysis and recommending solutions to resolve engineering issues. Advanced data analysis techniques and instrumentation are applied to these processes. As a Senior NVH Engineer involvement will include test preparations, the application of appropriate instrumentation, data capture and analysis, through to reporting. Most of the work is based on experimental techniques but there is an increasing need to integrate CAE methods with experimental testing. The role will involve working closely with other team members and liaison with engineers in product teams. The nature of NVH projects, and their visibility within the organisation, demands ownership of deliverables and attention to detail.

The Person
The successful candidate: -
> Must be able to work as part of a team, and be competent to work independently where there are established processes. Will also be capable of day-to-day management of assigned projects.
> Will have successfully run NVH projects in an experimental engine, machine, or vehicle environment.
> Will be able to demonstrate a clear understanding of sound and vibration theory and the fundamentals of signal processing.
> Have effective communication skills, both written and oral, and be able communicate technical information within the company, and with external customers.
> Will display a thorough, but practical approach to problem solving, test execution, and reporting.

And is likely to: -
> Be qualified to Degree level or have equivalent experience.
> Have some experience in areas such as modal analysis, operating shapes, vibro-acoustics, sound intensity, and engine/cab mounting.
> Experience of LMS Test.Lab or 01dB software, Sound Quality analysis, or CAE would be an advantage.

To apply for this position, candidates must be eligible to live and work in the UK

happyman

NVH - FEA Engineer (Engine Background)
Global Engineering techcentre
   
Quick Apply
  
Customised Apply  
   

Experience:3 - 8 Years Location:Pune, Vadodara/Baroda,
United States (USA)Compensation:At par with Industry standardsEducation:UG - B.Tech/B.E. - Automobile, Marine, Mechanical, Metallurgy, Production/Industrial PG - Any PG Course - Any SpecializationIndustry Type:Auto/Auto AncillaryFunctional Area:Engineering Design, R&DPosted Date:12 Jun

Job Description
1.Structural analysis of Engine and engine component
2.Experience in Engine NVH Simulation required
3.Engine Noise reduction techniques: Engine modal analysis, response analysis and Acoustic Analysis.
4.Torsional vibration analysis of Engine and engine components
5.Static stress analysis, Normal Mode Dynamic Analysis, Non-linear analysis, Response Analysis using FEA packages.
6.Damage calculation to find Fatigue Life.
7.Knowledge of engine and crankshaft vibration suppression
8.Noise and Vibration measurement
9.Keywords : CAE, FEA, NVH,
Desired Candidate Profile
Candidates with H1b visa preferred for onsite opening.
BE must.
Company Profile
Engineering centre of one of the country's largest engineering organizations which offers end-to-end design and engineering solutions to global manufacturers.
Read Global Engineering techcentre Blog

Contact Details
Company Name:Global Engineering techcentre
Website:Not Mentioned
Executive Name:Hima Bindu
Address:Not Mentioned
Email Address:hima.mumbai@omamconsultants.com
Telephone:022 - 26400419/420
Reference ID:NVH/June - 08

Keywords: CAE, FEA, NVH,

Radiant

NVH绝对是个好职业，在中国尤其如此。美国底特律地区的经济萧条，公司裁员缩减乃至破产，但是中国印度两个国家，后面十年里是汽车业发展的黄金时期，从前十年的汽车制造，将迅速转型为汽车的设计。仅仅中国上海大众一地就要招收几千名工程师，其中包括不少NVH工程师。诸位抓住机会！